1. Place & Prepare the SCSI Disc into slot labelled 0400 in disc unit
2. Place & Prepare the Diagnostic Tape into Magnetic Tape Unit
3. At the Operators CONSOLE Data Terminal
@@P
// HALT <cr>
// RST <cr>
// CLE <cr>
// GPR0=1 <cr> —–> GPR0=1 to disable auto diagnostic
// IPL=1000 <cr> —–> It will load the Diagnostic Files from MTU :
- For Level 1 : under Diagnostic Overlay Loader ( DOL > )
- For Level 2 : under Diagnostic eXecutive Program ( DXP > )
System will responds with …………………
Memory Initialization Started ……………..Completed
Gould Diagnostic Loader ………….. ……..etc
DOL >
DOL > SHOW FILES <cr > —-> To see the Diagnostic Files Listing
DOL > LOAD CV.DXP <cr > —-> To go to “Level 2” Diagnostic —-> ( DXP > )
System will responds with ….
* LOADED : ‘CV.DXP.M’
PGM:03000
DOL > START <cr >
System will responds with ….
Default Real-Time Clock Rate = 60Hz ; [ cr , # ] ? 50 <cr>
Default Time-of-Day = 00:00:30 ; [ cr , HH:MM:SS ] ? ( you can typeTime if needed ) <cr>
Do you need Help ; [ Y , N ] ? ( you can type “Y” or “N” if needed ) <cr>
DXP > SHOW FILES <cr > —-> To see the Diagnostic Files Listing
DXP > LOAD LTC(RP.MVP) <cr > —> To load the MVP Program with name “LTC”
Then answer the questions with ….
C < cr > —-> Continue the MVP program loading
< cr > —-> Default answer = “TY7EFC”
< cr > —-> Default answer = “N”
04 < cr > —-> Disc Processor Address = “04” ( IPL=0400 )
< cr > —-> Default answer = “MPX”
0,8155,N < cr > —-> Disc Address = “0”, Model = “8155”, Dual = “N”
< cr > —-> Default answer
DXP > START LTC <cr > —-> To Start the MVP program with name “LTC”
Then answer the questions with ….
1 < cr > —-> Select Format procedure from the menus
F < cr > —-> Continue to Format the Media Disc
